How can you do effective and smooth roller shutter repair on your own

How can you do effective and smooth roller shutter repair on your own (DIY)?

Introduction

Roller shutters are an important part of making the entire place safe and secure. They are important for closing the windows and doors whether it is for residential, commercial, or industrial areas. Moreover, the shutters are highly resistant to different situations which can increase the security to another level. The rolling mechanism of the shutters is what makes it easier to operate them no matter where you can get them installed.

This is true, daily wear and tear can make the shutter not work in the way you want. If there’s any problem with its working then you need to get in touch with the professionals for shutter repair. Here our experts have shared some tips in which you can repair the shutter on your own.

What do you need?

  • A new cinghia
  • A ladder
  • Robust scissors
  • Cutter

Inspect the winding mechanism

If the belt does not roll up again, then you need to inspect the winding mechanism which is present inside the belt base compartment. By taking out the screws from the protection plate you can easily reach the part of the spring mechanism.

In the case at this point, if you check the presence of knots or any other material which has affected the mechanism part, then the next step is carried out by taking away the obstruction, and then the belt is replaced in the sliding compartment when it is released.

 

Take away the axle which covers the body

However, it is extremely common for the belt to progressively tear in the upper section because the shutter weight is in excess and the daily use will lead to consequent traction. To do this correctly, the shutters need to be lowered properly and then the axis is removed by closing the box. Take the damaged part away if the belt is torn and worn out completely.

If it has not come out then remove it from the hook by making a clean cut which is at least 3cm below the worn area.

 

How can you hand it up?

To hang it, you need to use a cutter which is in a slot-shaped cut. Make sure that you get it positioned correctly in the winder compartment so that there is no problem.

 

Check the damage

The shutters do not get damaged in excess when you keep up with the maintenance. Additionally, its structure is robust and there is no way that suddenly the shutters can get damaged.

 

Leave a Reply

Your email address will not be published. Required fields are marked *